3 Paslode Framing Nails
| Finish | Other Names | Description | Class |
|---|---|---|---|
| Bright | Bright Steel | Un-plated, bright iron with no corrosion protective coating. | 1 |
| Copper | Copper Flash | Thin copper coating generally used for the protection of bright steel staples. | 1 |
| Electro Galvanised | E/Galv | Electromagnetic Galvanising uses electrolysis to draw zinc and chromate onto the surface of bright steel. The result is a thin galvanised layer with a smooth finish, typically up to 10μm (microns). | 2 |
| Mechanical Galvanised | M/Galv | Nails are coated with zinc by peening powdered forms of the desired coating onto the surface of the nails. | 2 |
| Galvanised | - | Similar to Hot Dipped Galvanising, the zinc coating is applied by immersing a solid continuous wire feed in molten zinc. | 3 |
| Armor Galv | - | A corrosion resistant zinc/iron alloy coating with a uniform thickness of 40μm microns. Armor Galv nails are suitable for exterior applications where a traditional HDG or M/Galv fastener is specified. | |
| Hot Dipped Galvanised | HDG | Nails are dipped into hot melted zinc until a surface layer of minimum 50μm of zinc has been created. The thickness of the zinc layer varies from minimum 50μm to typically around 80μm. | 3 |
| Polymer Coated | Dip Coated | A functional resin or glue coating is applied to the nail shank to reduce the required nailing power and also to increase the withdrawal resistance of the nail.- | - |
Paslode Galvanized Nails
Paslode Ring Shank Nails
Paslode - 650385 Round Head 3-Inch by.120 by 30 Degree Paper Tape Collated Ring Shank Hot Dipped Galvanized Framing Nails for Framing Nailers (2,000 per Box) 4.8 out of 5 stars 139 Paslode 219235 F350 Power Master Plus Repair Kit. Hot Dipped Galvanized 30° Framing Nails. SUPERIOR DRIVE THAT HELPS ENSURE FEWER JAMS AND MORE NAILING. Our industry leading nails are designed and manufactured to match the specs of Paslode nailers so your nailer will run smoothly, with fewer misfires and jams while driving flush, even into the toughest materials. I have the latest paslode impulse framer and it sinks 3-1/4' round head nails (with the glued ends) into LVL no problem. Itll go just below flush and not much more. Cant run it too fast in LVL or it will start to leave the nails proud. I can say it does a better job than the pneumatic guns in LVL. I've never had any major issues with my paslode. Paslode B31250T 2500-Pack 75mm x 3.06mm Hot Dipped Galvanised RounDrive Strip Nails with 2 Fuel Cells Set W W Paslode B31250T 2500-Pack 75mm x 3.06mm Hot Dip $ 181 13 FREE SHIPPING.